The wall mount
Permanent warmth, built into the space.
Mounts to the wall, the ceiling or a pole and disappears into the architecture. Install it once and it heats the same seats every night.
The Bromic Tungsten Smart-Heat 500 is a wall, ceiling or pole mounted gas patio heater delivering 43,000 BTU across up to 215 sq ft, in natural gas or propane.
Not sure which Bromic is right for you?
- Want to move your heat around the property? Choose the Portable.
- Building a covered patio or outdoor kitchen? Choose the 500 Wall Mount.
- No gas line? Go electric. Want maximum heat output? Go gas.
Still unsure? Take the 2 minute Bromic quiz, or call us at 1 (888) 851-8852.
Why you'll love it
- Warms people and surfaces directly, not the air above their heads
- 43,000 BTU across up to 215 sq ft from a single unit
- Mounts to a wall, a ceiling or a pole and blends into the build
- Natural gas or propane, your setup, your call
- 304-grade stainless, built for Canadian rain, snow and wind
Compare the Bromic Tungsten Portable and 500 Wall Mount
| Portable | Wall Mount | |
|---|---|---|
| Installation | None on propane | Professional, fixed |
| Best for | Flexible patios, events, rentals | Permanent covered patios |
| Output | 21,300 to 38,500 BTU | 43,000 BTU |
| Fuel | Propane or natural gas | Natural gas or propane |
| Heat deflector | Included | Optional add-on |
| Mobility | Moves anywhere | Stays put |
Specifications
| Maximum output | 43000 BTU |
| Coverage | Up to 215 sq ft |
| Wind rating | 8 mph |
| Weight | 44 lb |
Manuals and documents
Documents open as PDFs. Bromic is the manufacturer and the source of record for all specifications and warranty terms.
See it in action
Complete your Bromic system
Required
- A controller, wall switch or Affinity, sized to your zones
The heat deflector is an optional add-on on the 500, recommended under a pergola or wood ceiling.
Questions before you buy
Where can I mount it?
Wall, ceiling or pole. Mount 8 to 10 feet above the finished floor for full-strength heat. If the ceiling forces a higher mount, size up rather than accept weak output.
What controls work with it?
A rated wall switch for on and off, or an Affinity controller for zoning. Call us to match the controller to your layout.
Can it be mounted under a pergola or wood ceiling?
Yes, with the heat deflector, which redirects heat downward and lowers the required overhead clearance for cedar beams and low ceilings. Keep the clearances in the manual.